5. Insert the SD card into either socket [A], [B].
• The place [C] on the cover is for storing the SMC list when the machine is shipped.
6. Reassemble the machine.
•
The original application SD card should be kept in a safe place, for the following reasons:
• The SD card can be the only proof that the user is licensed to use the application program.
• You may need to check the SD card and its data to solve a problem in the future.
Move Exec
The menu "Move Exec" (SP5-873-001) lets you move application programs from the original SD card
to another SD card.
• Do not turn ON the write protect switch of the system SD card or application SD card on the
machine. If the write protect switch is ON, a download error (e.g. Error Code 44) occurs during a
firmware upgrade or application merge.
1. Turn the main switch off.
2.
Make sure that a target SD card is in SD Card Slot 1 (upper). The application program is moved to
this SD card.
2. Installation
130
To Next Page
Loading...
Need help?
General
