• The value or actions that can be selected differ depending on the model you are using. For details
about available punch holes, see the manual that comes with this machine.
Usercode
Specify the usercode.
Usercode=\"value of usercode\"
The usercode must be specified using up to eight digits.
The usercode must be inside double quotation marks (" ").
Some operating systems cannot forward the user code if it is inside double quotation marks. If this is the
case, include escape characters such as back slashes (\) (0x5c) in place of double quotation marks.
• rsh
% rsh nphost print usercode=\"12345\" < file1
• rcp
% rcp file1 nphost: usercode=\"12345\"
• ftp
ftp> put file1 USERCODE=\"12345\"
• If you are printing with the ftp command, enter the usercode in uppercase letters.
Symbol Set
Select the set of print characters for the chosen font.
• This function is only for PCL.
symset=value of font
Symbol Set Value
Arabic-8 arabic8
Desktop desktop
Greek-8 greek8
Hebrew-7 hebrew7
Hebrew-8 hebrew8
Specifying the Device Option
41
To Next Page
Loading...
Need help?
General
