1. Device Control Command Set
About Device Control Command Set
Device Control commands control basic device operations, error reporting and recovery, and the
construction of logical pages on the physical medium.
Before the host program sends the Begin Page command to begin defining a page to be printed, it
should establish the printing environment in which the page is to be printed.
The following Device Control commands are described in this section:
• p.10 "Acknowledgement Reply"
• p.13 "Activate Resource"
• p.22 "Begin Page"
• p.23 "Deactivate Font"
• p.26 "End"
• p.27 "End Page"
• p.28 "Load Copy Control"
• p.41 "Load Font Equivalence"
• p.45 "Logical Page Descriptor"
• p.50 "Logical Page Position"
• p.52 "Presentation Fidelity Control"
• p.54 "Sense Type and Model"
• p.67 "Execute Order Any State (XOA)"
• p.67 "XOA Mark Form"
• p.67 "XOA Exception Handling Control"
• p.77 "Execute Order Home State (XOH)"
• p.77 "XOH Obtain Printer Characteristics"
• p.107 "XOH Select Input Media Source"
• p.108 "XOH Set Media Origin"
• p.109 "XOH Set Media Size"
• p.110 "XOH Page Counter Control"
• p.110 "XOH Define Group Boundary"
• p.119 "XOH Specify Group Operation"
• "XOA-RRL Replies for Font Character Sets", IPDS Technical Reference 1
9
To Next Page
Loading...
Need help?
General
