IPDS Default Font
Factory Setting
The factory setting for the default font is Courier Roman Medium 10 pitch (12 point) using code page
037, version 1. The GRID for the default font is: FGID=416, GCSGID=697, CPGID=037,
FontWidth=144 (CPI setting is 10.0). The default font may be changed by the operator using the
printer's control panel. It will reset to the Factory Setting upon each IML. It can be reset to the Factory
Setting by doing a Cold Reset to the printer.
The default font can be set for Single Byte fonts. It does not contain Double Byte Font Character Sets or
Code Pages.
6. Fonts
122
To Next Page
Loading...
Need help?
General
