Ricoh MP 6002 User Manual

2. Press [Cancel Scanning] or [Cancel TX].
Depending on the transmission mode and function you use, either [Cancel Scanning] or [Cancel
TX] is displayed.
Canceling a Transmission After the Original Is Scanned
Use this procedure to cancel a transmission after the original is scanned.
You can cancel transmission of a file while the file is being sent, stored in memory, or if it fails to transmit.
All the scanned data is deleted from memory.
1. Press the [Stop] key.
CJN024
You can also press [TX/RX Status / Print], and then [Check / Stop Transmission File].
2. Press [Standby File List].
To cancel transmission of a file stored in the memory, press the [File List] tab.
3. Select the file you want to cancel.
If the desired file is not shown, press [ ] or [ ] to find it.
4. Press [Stop Transmission].
To cancel another file, repeat steps 3 through 4.
5. Press [OK].
6. Press [Exit].
After pressing [Check / Stop Transmission File] under [TX/RX Status / Print] in step 1, press [Exit]
twice.
Canceling a Transmission
83

Ricoh MP 6002 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Max Paper Size	A3
Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	8, 300 sheets
Monthly Duty Cycle	300, 000 pages
Fax Speed	33.6 kbps
Fax Resolution	200 x 200 dpi
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	60 ppm
Scan Resolution	600 x 600 dpi
Memory	2 GB
Hard Drive	160 GB
Network Connectivity	Ethernet
Scanner Type	Flatbed, Automatic Document Feeder