10. Troubleshooting
This chapter describes basic troubleshooting procedures.
Indicators
This section describes the indicators displayed when the machine requires the user to remove misfed
paper, to add paper, or to perform other procedures.
Indicator Status
: Paper Misfeed indicator Appears when a paper misfeed occurs.
For details about removing jammed paper, see "Removing
Jammed Paper", Troubleshooting .
: Original Misfeed indicator Appears when an original misfeed occurs.
For details about removing jammed paper, see "Removing
Jammed Paper", Troubleshooting .
: Load Paper indicator Appears when paper runs out.
For details about loading paper, see "Loading Paper",
Paper Specifications and Adding Paper .
: Add Toner indicator Appears when toner runs out.
For details about adding toner, see "Adding Toner",
Maintenance and Specifications .
: Add Staple indicator Appears when staples run out.
For details about adding staples, see "Adding Staples",
Maintenance and Specifications .
: Waste Toner Full indicator Appears when the waste toner bottle is full.
Contact your sales or service representative.
: Empty Hole Punch Receptacle
indicator
Appears when the hole punch receptacle is full.
For details about removing punch waste, see "Removing
Punch Waste", Troubleshooting .
: Waste Staple Full indicator Appears when the waste staple receptacle is full.
Contact your service representative.
: Service Call indicator Appears when the machine is malfunctioning or requires
maintenance.
151
To Next Page
Loading...
Need help?
General
