2. Getting Started
This chapter describes how to start using this machine.
Guide to Names and Functions of Components
Guide to Components
• Do not obstruct the ventilation holes by placing objects near them or leaning things against them. If
the machine overheats, a fault might occur.
Front and left view
1. ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
2. Exposure glass
Place originals face down here.
3. Copy tray
Copied/printed paper and fax messages are delivered here.
4. Main power switch
To operate the machine, the main power switch must be on. If it is off, open the cover and turn the switch on.
27
To Next Page
Loading...
Need help?
General
