Ricoh MP 6002 User Manual

6. Press [Change] for the administrator you wish to reset.
7. Press [Change] for "Login Password".
8. Enter the login password, and then press [OK].
9. Re-enter the login password for confirmation, and then press [OK].
10. Press [OK] twice.
You will be automatically logged out.
• Log in as the supervisor only to change an administrator's password. Administrator's login names
cannot be changed.
Changing the Supervisor
This section describes how to change the supervisor's login name and password.
To do this, you must enable the user administrator's privileges through the settings under "Administrator
Authentication Management". For details, see p.16 "Specifying Administrator Privileges".
1. The supervisor logs in from the control panel.
For details on how to log in, see p.22 "Administrator Login Method".
2. Press [System Settings].
1. Getting Started
26

Ricoh MP 6002 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Max Paper Size	A3
Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	8, 300 sheets
Monthly Duty Cycle	300, 000 pages
Fax Speed	33.6 kbps
Fax Resolution	200 x 200 dpi
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	60 ppm
Scan Resolution	600 x 600 dpi
Memory	2 GB
Hard Drive	160 GB
Network Connectivity	Ethernet
Scanner Type	Flatbed, Automatic Document Feeder