1B-5 Emission Control Devices:
3) Check the resistance between the terminals (W – W)
of the HO2 sensor. If the resistance is not within the
standard range, replace the HO2 sensor with a new
one.
Resistance
Approx. 11.5 – 14.5 Ω (at 23 °C)
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Resistance (Ω)
4) Connect the HO2 sensor coupler securely.
CAUTION
!
Do not apply oil or other materials to the
sensor air hole.
PCV Hose Inspection
B705H11206003
Inspect the PCV hose (1) for wear and damage.
If it is worn or damaged, replace the PCV hose with a
new one.
Check that the PCV hose (1) is securely connected.
PCV Hose Removal and Installation
B705H11206005
Removal
1) Remove the PCV hose (1).
Installation
Install the PCV hose in the reverse order of removal.
(A)
I705H1120008-01
1
I705H1120002-01
1
I705H1120002-01
To Next Page
Loading...
Need help?
General
