1C-1 Engine Electrical Devices:
Engine Electrical Devices
Precautions
Precautions for Engine Electrical Device
B705H11300001
Refer to “General Precautions in Section 00 (Page00-1)” and “Precautions for Electrical Circuit Service in Section 00
(Page00-2)”.
Repair Instructions
ECM Removal and Installation
B705H11306023
Removal
1) Remove the battery (–) lead wire. Refer to “Battery
Removal and Installation in Section 1J (Page1J-10)”.
2) Remove the meter panel. Refer to “Meter Panel
Removal and Installation in Section 9D (Page9D-
14)”.
3) Pull out the ECM (1) from the front box and
disconnect the ECM coupler (2).
Installation
Install the ECM in the reverse order of removal.
CKP Sensor Inspection
B705H11306003
Refer to “DTC “C12” (P0335): CKP Sensor Circuit
Malfunction in Section 1A (Page1A-22)”.
CKP Sensor Removal and Installation
B705H11306004
Removal
1) Drain engine oil. Refer to “Engine Oil and Filter
Change in Section 0B (Page0B-9)”.
2) Remove the muffler. Refer to “Exhaust Pipe / Muffler
Removal and Installation in Section 1K (Page1K-2)”.
3) Disconnect the CKP sensor coupler (1).
4) Remove the generator cover (2).
5) Remove the CKP sensor (3).
2
1
I705H1130001-02
1
I705H1130021-02
2
I705H1130022-01
3
I705H1130002-02
To Next Page
Loading...
Need help?
General
