Suzuki AN400 Service Manual

Steering / Handlebar: 6B-2
Handlebars Removal and Installation
B705H16206016
Removal
Remove the handlebar cover. Refer to “Handlebar Cover
Removal and Installation in Section 9D (Page9D-13)”.
Left side
1) Remove the rear view mirror (1).
2) Disconnect the rear brake light switch lead wire
couplers (2).
3) Remove the rear brake master cylinder (3).
CAUTION
!
Do not turn the rear brake master cylinder
upside down.
4) Remove the left handlebar switch box (4).
5) Remove the handlebar balancer (5).
6) Remove the grip rubber (6).
Right side
1) Remove the rear view mirror (1).
2) Disconnect the front brake light switch lead wire
couplers (2).
3) Remove the front brake master cylinder (3).
CAUTION
!
Do not turn the front brake master cylinder
upside down.
4) Remove the right handlebar switch box (4).
5) Remove the handlebar balancer (5).
6) Remove the throttle grip (6).
Handlebar holder
1) Remove the handlebar clamp bolts (1).
2) Remove the handlebar holder (2).
3) Remove the handlebars (3).
CAUTION
!
Hold the handlebar by the hand to prevent
throw or drop out of the steering stem.
1
2
3
5
4
6
I705H1620001-01
1
2
3
5
6
4
1
2
3
5
6
4
I705H1620002-01
1
1
3
2
2
I705H1620003-03

Suzuki AN400 Specifications

General

Brand	Suzuki
Model	AN400
Category	Scooter
Language	English