Maintenance and Lubrication: 0B-14
Brake Pad Check
The extent of brake pad wear can be checked by
observing the grooved limit line “A” on the pad. When the
wear exceeds the grooved limit line, replace the pads
with the new ones. Refer to “Front Brake Pad
Replacement in Section 4B (Page4B-2)” and “Rear
Brake Pad Replacement in Section 4C (Page4C-2)”.
CAUTION
!
Replace the brake pad as a set, otherwise
braking performance will be adversely
affected.
Front Brake Hose Inspection
Inspect the front brake hoses and hose joints for crack,
damage or fluid leakage. If any defects are found,
replace the brake hose with a new one.
Rear Brake Hose Inspection
Inspect the rear brake hose for crack, damage or fluid
leakage. If any defects are found, replace the brake
hose with a new one.
Brake Hose Replacement
B705H10206035
Refer to “Front Brake Hose Removal and Installation in
Section 4A (Page4A-6)” and “Rear Brake Hose Removal
and Installation in Section 4A (Page4A-6)”.
Air Bleeding from Brake Fluid Circuit
B705H10206036
Refer to “Air Bleeding from Brake Fluid Circuit in Section
4A (Page4A-4)”.
Brake Fluid Replacement
B705H10206037
Refer to “Brake Fluid Replacement in Section 4A
(Page4A-5)”.
“A”
I705H1020053-02
“A”
I705H1020054-02
I705H1020029-01
I705H1020034-01
To Next Page
Loading...
Need help?
General
