Exterior Parts: 9D-18
Front Box Removal and Installation
B705H19406017
Removal
1) Remove the lower leg shield and front frame cover.
Refer to “Lower Leg Shield Removal and Installation
(Page9D-16)” and “Front Frame Cover Removal and
Installation (Page9D-17)”.
2) Remove the ambient temperature sensor (1) from
the front box.
3) Remove the ECM (2) from the front box.
4) Remove the front box inner cover (3) and disconnect
the power terminal coupler (4).
5) Remove the front box (5) by removing the screws
and bolts.
Installation
Install the front box in the reverse order of removal.
1
I705H1940030-02
2
I705H1940032-02
4
3
I705H1940033-02
I705H1940034-01
5
I705H1940035-02
To Next Page
Loading...
Need help?
General
