Rear Suspension: 2C-14
Specifications
Service Data
B705H12307002
Suspension
Unit: mm (in)
Tightening Torque Specifications
B705H12307003
NOTE
The specified tightening torque is also described in the following.
“Rear Suspension Components (Page2C-1)”
“Rear Suspension Assembly Construction (Page2C-2)”
“Rear Swingarm Components (Page2C-3)”
“Crankcase Bracket Construction (Page2C-11)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications in Section
0C (Page0C-7)”.
Item Standard Item
Rear wheel travel 100 (3.94) —
Rear shock absorber spring adjuster 3rd position —
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Cushion lever nut 50 5.0 36.0 )(Page2C-4)
Cushion rod nut 50 5.0 36.0 )(Page2C-4)
Rear shock absorber bolt 50 5.0 36.0 )(Page2C-4)
Rear cushion rod nut 50 5.0 36.0 )(Page2C-4)
Cushion lever mounting nut 80 8.0 58.0 )(Page2C-4)
Rear brake caliper bolt 23 2.3 16.5 )(Page2C-7)
Rear swingarm bolt 50 5.0 36.0 )(Page2C-7)
Rear axle nut 120 12.0 87.0 )(Page2C-7)
Exhaust pipe connecting bolt 23 2.3 16.5 )(Page2C-7)
Muffler mounting bolt 23 2.3 16.5 )(Page2C-7)
Crankcase bracket nut 85 8.5 61.5 )(Page2C-12)
Rubber damper bolt 85 8.5 61.5 )(Page2C-12)
To Next Page
Loading...
Need help?
General
