Suzuki AN400 Service Manual

Drive Chain / Drive Train / Drive Shaft: 3A-9
Specifications
Tightening Torque Specifications
B705H13107001
NOTE
The specified tightening torque is also described in the following.
“Final Gear Components (Page3A-2)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications in Section
0C (Page0C-7)”.
Special Tools and Equipment
Recommended Service Material
B705H13108001
NOTE
Required service material is also described in the following.
“Final Gear Components (Page3A-2)”
Special Tool
B705H13108002
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Final gear cover bolt
22 2.2 16.0
)(Page3A-4) /
)(Page3A-8)
Oil drain plug 12 1.2 8.5 )(Page3A-4)
Oil level bolt
16 1.6 11.5
)(Page3A-4) /
)(Page3A-8)
Oil filler bolt 23 2.3 16.5 )(Page3A-8)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE A or
equivalent
P/No.: 99000–25010 )(Page3A-7) / )(Page3A-
7)
09913–50121 09913–70210
Oil seal remover Bearing installer set
)(Page3A-4) / )(Page3A-
6)
)(Page3A-5) / )(Page3A-
6) / )(Page3A-7) /
)(Page3A-7) / )(Page3A-
7)
09913–75830 09921–20240
Bearing installer Bearing remover set
)(Page3A-6) )(Page3A-4) / )(Page3A-
6)

Suzuki AN400 Specifications

General

Brand	Suzuki
Model	AN400
Category	Scooter
Language	English