Xerox Phaser 6600 Service Manual

Error Troubleshooting
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
2-35
Installation Settings (Installation)
Set the parameter as indicated in the following table.
Item Range Description
Serial No. 9 digits Displays or changes the 9 digits serial number.
PagePack Enable,
Disable
Displays the current PagePack status (Enable or
Disable).
HexDump ON,OFF Specifies whether HexDump to set to ON or
OFF.
Tone Correction (IOT tone control) ON,OFF Specifies whether IOT Tone Correction to set to
ON or OFF.
Pixel Counter 0-100% Displays the last print pixel coverage (%) for 4
mm square meter in A4 paper, per Y/M/C/K
color.
Configuration Dip Switch0 - Operates the DIP switches on the NVM in ESS.
Dip Switch1
Dip Switch2
Dip Switch3
XCPT Mode Legacy,
XCPT
Displays/Specifies the XCPT Mode setting.
Legacy: Follows the rule of the existing print
service.
XCPT: Follows the XCPT (XFCI) rule.

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm