EasyManuals Logo
Home>Xerox>Printer>Phaser 6600

Xerox Phaser 6600 Service Manual

Xerox Phaser 6600
662 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #575 background imageLoading...
Page #575 background image
Maintenance
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
6-7
Cleaning the Interior
Clean the interior of the printer regularly to prevent stains inside the printer that can deteriorate
printing quality. Clean the printer interior whenever you replace an imaging unit.
After clearing paper jams or replacing a toner cartridge, inspect the inside of the printer before closing
the printer covers.
• Remove any remaining pieces of paper or debris. For details, see Clearing Paper Jams on page 224.
• Remove any dust or stains with a dry, clean cloth.
WARNING: Never touch a labeled area on or near the heat roller in the fuser. You can get burned.
If a sheet of paper is wrapped around the heat roller, do not try to remove it immediately. Switch
off the printer immediately and wait 40 minutes for the fuser to cool. Try to remove the jam after
the printer has cooled.
Cleaning the Laser Lenses
If prints have voids or light streaks through one or more color, use the following instructions to clean
the laser lenses.
Note: The figures depict the MFP, but the procedure is applicable to the SFP.
WARNING: If you accidentally get toner on your clothes, lightly dust them off as best as you can.
If some toner remains on your clothes, use cool water, not hot, to rinse off the toner. If toner gets
on your skin, wash it off with cool water and a mild soap. If you get toner in your eyes, wash it out
immediately with cool water and consult a doctor.
1. Turn off the printer.
CAUTION: If the optional Productivity Kit (HD) is not installed, ensure that the Ready LED is off
before you turn off the printer. The data in the memory is cleared when the printer is turned off.
2. Open the right side door.

Table of Contents

Other manuals for Xerox Phaser 6600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 6600 and is the answer not in the manual?

Xerox Phaser 6600 Specifications

General IconGeneral
ColorYes
Duplex printingNo
Print technologyLaser
Maximum resolution600 x 600 DPI
Time to first page (black, normal)9 s
Time to first page (color, normal)10 s
Print speed (black, normal quality, A4/US Letter)36 ppm
Maximum duty cycle80000 pages per month
Number of print cartridges-
Internal memory256 MB
Processor frequency533 MHz
Maximum internal memory768 MB
Sound pressure level (printing)53 dB
Total input capacity700 sheets
Total output capacity250 sheets
Paper tray media typesCard stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)A4
Standard interfacesUSB 2.0
USB 2.0 ports quantity1
AC input frequency50 - 60 Hz
Power consumption (standby)65 W
Power consumption (printing)535 W
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Weight25500 g
Dimensions (WxDxH)429.26 x 487.68 x 383.54 mm

Related product manuals