General Information
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
1-3
Manual Organization
The Phaser 6600 & WorkCentre 6605 MFP Service Manual contains these sections:
Introductory, Safety, and Regulatory Information: This section contains important safety
information and regulatory requirements.
Chapter 1 - General Information: This section contains an overview of the printer’s operation,
configuration, specifications, and consumables.
Chapter 2 - Error Codes and Troubleshooting: This section provides detailed troubleshooting
procedures for error messages and codes generated by resident diagnostics. Troubleshooting covers
the operation of Power On Self Test (POST) and Service Diagnostics. In addition, this section includes
troubleshooting methods for situations where error indicator is not available.
Chapter 3 - Image Quality Troubleshooting: This section focuses on techniques to correct image
quality problems associated with the printer output.
Chapter 4 - Service Parts Disassembly: This section contains removal procedures for spare parts listed
in the Parts List. A replacement procedure is included when necessary.
Chapter 5 - Parts List: This section contains exploded views of the print engine and optional Field
Replaceable Units (FRUs), as well as part numbers for orderable parts.
Chapter 6 - Maintenance: This section provides periodic cleaning procedures for the printer. This
section also provides procedures for the adjustment of print engine components
Chapter 7 - Wiring: This section contains the plug/jack locations and wiring diagrams for the printer.
Appendix - Reference: This section provides a list of acronyms and their definitions, and a menu map
for the Phaser 6600.