Xerox Phaser 6600 Service Manual

Error Troubleshooting
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
2-61
Scanner Maintenance
White Balance
Adjusts the White Balance.
Shading Parameter
Specifies the Shading factor.
Item
Display After Diag
Normal Error
Auto Adjust(FB) Adjust OK Auto Adjust(FB) Adjust NG
Auto Adjust(DADF) Adjust OK Auto Adjust(DADF) Adjust NG
Item Range
Coeff FB RED 4 digits (hexadecimal)
(each digit 0 - 9, A - F)
Coeff FB GREEN
Coeff FB BLUE
Coeff FB GRAY
Coeff DADF RED 4 digits (hexadecimal)
(each digit 0 - 9, A - F)
Coeff DADF GREEN
Coeff DADF BLUE
Coeff DADF GRAY
Target RED 2 digits (hexadecimal)
(each digit 0 - 9, A - F)
Target GREEN
Ta r g e t B LU E
Ta r g e t G R AY

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm