Section 10.0
MAN 06–0017H
ZIEHM QUANTUM User’s Manual Page 135 of 220
10.2 NEW PAT (NEW PATIENT)
The NEW PAT button is located on the upper left side of the Desk View Control Panel.
Press the NEW PAT button to enter the New Patient Information screen.
The system will default to the patient last name as the first input field. If you choose to start in a
different input field just touch the button next to the entry filed to select the appropriate input
filed.
Press ENTER button to move to the next input field, or press the button next to the entry filed
that you would like to enter information into.
After the last line has been completed, you have the opportunity to review the entered data before
it is added to the data file. To save the new patient information press the SAVE button to accept.
The Screen will remove all information from the fields to allow the user to enter another new
patient.
Press ESC button to escape the new patient screen and return to the main Fluoroscopic screen.
Fig 10.1
10.3 NEW PATIENT ENTRY
10.3.1 PATIENT NAME
Enter the Last Name of the patient’s name, and then press Enter to move to the next patient entry
field.
Enter the patients First Name; press Enter to move to the next patient entry field.
To Next Page
Loading...