•
Remove the rear brake calliper.
•
Unscrew the coupling from the rear
brake calliper after placing a container
for collecting the brake fluid.
CAUTION
WHEN FITTING THE REAR BRAKE CALLIPER TIE THE
ABS SENSOR CABLE TO THE BLEED PROTECTION CAP.
Front brake calliper
Removal
•
Undo the union (1) of the front calliper
after placing a suitable container un-
derneath to collect the brake fluid.
•
Undo and remove the two screws (2)
fastening the calliper.
•
Remove the calliper.
Rear brake disc
Removal
•
Remove the rear wheel.
•
Undo and remove the six screws fas-
tening the tone wheel/brake disc.
RS 125 - Tuono 125 - Euro 4 Braking system
BRAK SYS - 295