•
Working from behind the tank, lift the
filter box cover (3) and remove com-
plete with the filter element (4).
•
Separate the filter element (4) from the
filter box cover (3) on a clean, dry sur-
face.
CLEANING - AIR FILTER
NEVER USE SCREWDRIVERS OR OTHER TOOLS TO
WORK ON THE FILTER.
•
Clean the air filter (4) with compressed air, blowing from the inside of the filter outwards.
•
Clean the exterior of the air filter (4) with a clean cloth.
•
Clean the interior of the filter housing (5) and the intake ducts (6) with a clean cloth.
CAUTION
WHEN CLEANING THE FILTER ELEMENT, CHECK THAT THERE ARE NO TEARS IN THE ELE-
MENT ITSELF. REPLACE THE FILTER ELEMENT IF NECESSARY.
REPLACING THE AIR FILTER
Replace the air filter with a new component of the same type.
NOTE
NEVER REUSE AN OLD FILTER.
Braking system
Top-up
RISK OF BRAKE FLUID SPILLING. DO NOT OPERATE THE BRAKE LEVER IF THE BRAKE FLUID
RESERVOIR CAP IS LOOSE OR HAS BEEN REMOVED.
CAUTION
AVOID PROLONGED AIR EXPOSURE OF THE BRAKE FLUID. BRAKE FLUID IS HYGROSCOPIC
AND ABSORBS MOISTURE WHEN IN CONTACT WITH AIR. LEAVE THE BRAKE FLUID RESER-
VOIR OPEN ONLY FOR THE TIME NEEDED TO COMPLETE THE TOPPING-UP PROCEDURE.
RS 125 - Tuono 125 - Euro 4 Maintenance
MAIN - 71
To Next Page
Loading...
Need help?
General
