•
Operating from both sides, unscrew
and remove the screw and collect the
nut on the internal side.
•
Keeping the tank in position, lower it by
removing the supporting rod.
•
Remove the tank.
Rear wheelhouse
•
Beforehand, remove the tail fairing, the
taillight the saddle and the passenger
saddle.
•
Unscrew and remove the two fixing
screws.
•
Remove the mudflap.
Radiator cover
•
Unscrew and remove the central
screw.
•
Unscrew and remove the two upper
screws.
•
Retrieve the corresponding washers.
Bodywork RS 125 - Tuono 125 - Euro 4
BODYW - 364