•
Sliding it off the fitting slots, remove the
radiator.
•
Remove the electric fan if necessary.
Radiator installation
•
Install the radiator following the removal operations but in reverse order.
•
Fill the coolant tank with the recommended product.
•
Check that the system does not show leaks.
Removing the expansion tank
•
Remove the left side fairing and drain
off the coolant.
•
Lift the tank and fasten it in position
with the supplied supporting stem.
•
Unscrew and remove the two screws
and slide the piping out.
Cooling system RS 125 - Tuono 125 - Euro 4
COOL SYS - 318
To Next Page
Loading...
Need help?
General
