•
Remove the brake pads.
•
Check the brake pads.
•
Measure the thickness of the brake pads. If either one is under the service limit, replace
them.
Service limit 1.5 mm (0.05 in).
WARNING
IF THE BRAKE LEVER IS OPERATED WITH THE CLAMP EXTRACTED IT MIGHT BE NECESSARY
TO CARRY OUT THE CORRESPONDING BLEEDING.
CAUTION
WHEN FITTING, TIE THE ABS SENSOR CABLE TO THE BLEED CAP.
Rear brake pads
Removal
•
Remove the rear brake calliper.
•
Press the external pad, in the direction
indicated by the arrow.
•
Slide the pads out.
•
Check the brake pads.
Braking system RS 125 - Tuono 125 - Euro 4
BRAK SYS - 300