APRILIA Tuono 125 Euro 4 User Manual

Adjusting the lever
Adjustment clutch when the engine stops or the
vehicle tends to move forward even when clutch
lever is operated and the gear engaged, or if the
clutch "slides", resulting in acceleration delay con-
sidering the engine revs.
Minor adjustments can be carried out through the
set screw (1):
•
Rest the vehicle on its stand.
•
Remove the protection casing (2).
•
Loosen the lock nut (3).
•
Turn the set screw (1) until the empty
travel at the clutch lever end is approx-
imately 10 - 15 mm (0.39 - 0.59 in) (see
figure).
•
After adjusting, tighten the check nut
(3) to lock the adjuster screw (1).
•
Check the empty travel at the clutch
lever end.
•
Refit he protection casing (2).
NOTE
CHECK THE CONDITION OF THE CLUTCH CABLE: THERE
MUST BE NO SIGNS OF CRUSHING OR WEAR ALONG
THE ENTIRE LENGTH OF THE CABLE SHEATH.
•
Lubricate the clutch cable periodically with suitable lubricant to prevent premature wear and
corrosion.
Maintenance RS 125 - Tuono 125 - Euro 4
MAIN - 74

APRILIA Tuono 125 Euro 4 Specifications

General

Brand	APRILIA
Model	Tuono 125 Euro 4
Category	Motorcycle
Language	English