Brother GT-3 Series Service Manual

5. Regular Maintenance
5-1. Cleaning
5-1-1. Cleaning the Print Head Caps and Wiper Blades
Clean the Caps and Wipers when the printer indicates the warning “Exchange Maintenance Parts” on the
Display. You need Maintenance Cleaning Kit to clean the Caps and Wipers for both CMYK and White sides.
Let your customers know the importance of the maintenance to keep the printer in good conditions.
Be sure to exchange Wiper Cleaners after you clean the Caps and Wipers, which is packed together in
Maintenance Cleaning Kit.
1. Remove the Wiper Cleaner. (Refer to “6-1-17. Wiper Cleaner”.)
2. Prepare the Maintenance Cleaning Kit (Option*). (* See "2-1-4. Consumable Requirements and Options"
to get the Code Number.)
0062Y
3. Wear the gloves, and wet both sides of a Clean Stick (green grip) with the Wash Liquid.
<Note>
Use only the Wash Liquid included to wet the Clean Stick; using other liquid will cause damage to the
Print Heads.
4. Use the one side of wet Clean Stick to clean the front side of the Wiper Blade.
108
GT-3 Series

Brother GT-3 Series Specifications

General

Brand	Brother
Model	GT-3 Series
Category	Printer
Language	English