Brother GT-3 Series Service Manual

6. Replacing Parts
6-2-3. Motors, Solenoids, Sensors and Switches
10
11
9
8
6
1
2
3
4
5
7
1. Platen Motor
Located in the printer to move the Platen back and forth.
2. Carriage Motor
Located in the printer to move the Carriage left and right where the Print Heads are mounted.
3. White Ink Return Solenoid
Located in the printer to retrieve the White Ink inside the tubes back to the Ink Cartridge.
4. Print Switch
Located on the Operation Panel. It flashes while the print data is being received, and is ON when the
print data is ready to print.
5. Cover Open Switch
Located on the right side of the printer. It turns OFF the power for safety when the Cover UF is opened.
6. Flap Solenoid
Located in the printer to move the Sensor Flap.
7. Flap Sensor
Located in the printer to activate when the Sensor Flap is obstructed.
8. Power Switch
Located at the bottom of the Operation Panel to turn the power ON/OFF.
9. AC Inlet
Located at the back of the printer to plug AC Cord into the inlet.
10. Platen Origin Sensor
Located in the printer to detect the origin of the Platen.
11. Exhaust Fan
Located in the printer to exhaust the mist.
GT-3 Series
311

Brother GT-3 Series Specifications

General

Brand	Brother
Model	GT-3 Series
Category	Printer
Language	English