4. Solving Print Quality Problems
4. Solving Print Quality Problems
This chapter describes how to solve print quality problems.
CAUTION
This printer should only be used by operators who are appropriately trained in its operation.
Ensure there is adequate space left for safe working. The Platen moves forward while operating and
it may be injured.
Do not handle the platen while printing. If your hand gets caught between the platen or the T-shirt
tray and the covers, it may be injured.
Wait at least 1 minute after turning off the power switch before opening the front cover.
Do not touch the head heat sink as it may be HOT and may cause a bum.
Be careful not to get your fingers caught when closing the front cover, otherwise it may result in injury
to your fingers.
Do not move the Platen by hand. The Printer may be seriously damaged by this.
Do not put your hands inside the covers while the printer’s power is turned on, otherwise your hands
may touch against moving parts and this may result in injury.
GT-3 Series
89
To Next Page
Loading...
Need help?
General
