Brother GT-3 Series Service Manual

6. Replacing Parts
6-1-21. Replace the Pump Sensor
Required Tool
・Phillips screwdriver
Disassembling
1. Turn OFF the printer.
2. Remove the Cover PB and DB. (Refer to “6-1-2. Assembling/Disassembling of the Covers”.)
Suction Pump Assy
3. Remove the
connector (1) and remove the two Screws (2) that fix the Sensor Holder of the Suction Pump.
1
2
GT-3 Series
188

Brother GT-3 Series Specifications

General

Brand	Brother
Model	GT-3 Series
Category	Printer
Language	English