4-18
Paper Loading and Output Tray
Loading Paper in the Paper Cassette
4
■ Loading Standard Size Paper (See p. 4-20)
■ Loading Custom Size Paper (See p. 4-25)
■ Specifying the Size of the Paper in the Paper Cassette (See p. 4-30)
If you changed the size of the paper in the paper cassette, specify the following settings
using the control panel. You do not need to specify the settings if you did not change the
size of the paper.
The FEEDER MENU options in the SETUP menu
• CASSETTE1 SIZE = the size of the paper loaded in Cassette 1
• CASSETTE2 SIZE = the size of the paper loaded in Cassette 2
When printing from DOS, UNIX, or other operating system on which the printer driver
cannot be used, specify the following settings in addition to CASSETTE1 SIZE and
CASSETTE2 SIZE.
The FEEDER MENU options in the SETUP menu
• STD PAPER SIZE = the size of the loaded paper (See p. 6-16)
• STD PAPER TYPE = the type of the loaded paper (See p. 6-19)
■ Specifying the Paper Settings in the Printer Driver (See Driver Guide)
When printing from the printer driver, specify the following settings. For more details on
using the printer driver, see Help of the printer driver.
[Page Setup] Sheet
[Output Size] = the size of the loaded paper
[Paper Source] Sheet
[Paper Source] = [Cassette 1]
[Cassette 2]
[Paper Type] = [Plain Paper]: Plain Paper (60 - 89 g/m
2
)
[Plain Paper L]: Specify when paper curls excessively on printing
with [Plain Paper] selected.
[Heavy Paper 1]: Heavy Paper (90 - 120 g/m
2
)
Precautions on Loading Paper
Load paper when the printer status is in any of the following. When the (Job)
indicator is blinking, the printer is printing. Do not pull out the paper cassette.
IMPORTANT
•
Be sure to turn the printer ON once when loading paper in the paper cassette for the first
time after installing the paper feeder.
•
Be sure not to open the covers or paper cassette during printing. The printer may stop,
disabling printing.
To Next Page
Loading...
Need help?
General