6-20
Printing Environment Settings
6
SETUP Menu Settings
NOTE
•
You can perform automatic 2-sided printing only on plain paper (60 to 89 g/m
2
) and
heavy paper (90 to 120 g/m
2
) at sizes of A4, Legal, and Letter. For more details,
see "Paper Requirements," on p. 4-2.
•
When performing automatic 2-sided printing on paper with a logo, load the paper
as the following.
-When printing from the paper cassette, load the paper with the printing side of the
first page facing up.
-When printing from the multi-purpose tray, load the paper with the printing side of
the first page facing down.
•
You can obtain the same result by setting 2-SIDED PRINT. in the SELECT
FEEDER menu.
LAYOUT MENU Options
COPIES
1 to 9999; 1*
Specifies the number of copies to be printed.
The printer prints the specified number of copies.
OFFSET Y/OFFSET X
-50.0 to 50.0; 0.0* (mm)
Adjusts the printing position in the vertical direction (Y) or the horizontal direction
(X) by the specified value.
The printing position changes as follows according to the increase and decrease
of the specified value.
OFFSET Y: As the value increases, the gutter width in the Y direction
increases.
As the value decreases, the gutter width in the Y direction
decreases.
To Next Page
Loading...
Need help?
General