5-14
The Printing Environment
5
Menu Functions and Menu Operation
NOTE
HARD RESET is displayed after you keep holding down [OK] 3 seconds or more when
SOFT RESET is displayed in the display.
CANCEL JOB Menu
This section describes the function of the CANCEL JOB menu and the operating
procedure for it.
CANCEL JOB Menu Functions
The CANCEL JOB menu allows you to cancel only the job currently being received
or processed.
Pressing the (Cancel Job) key and [OK] on the control panel while the job you
want to cancel is being processed starts the cancel job process.
IMPORTANT
•
Cancel the job while the printer is processing the data (While the (Job) indicator is on
or blinking). No job is canceled by pressing the (Cancel Job) key when the (Job)
indicator is off.
•
The data that has already been processed and is being printed (started to be fed) cannot
be canceled. In this case, the next print data may be canceled.
•
When there is any print data sent from a printer driver other than that for this printer,
multiple data may be canceled.
NOTE
When canceling a job, you may not be able to cancel the job even if <03 CANCELING
JOB> is displayed.
Operating Procedure for the CANCEL JOB Menu
Pressing the (Cancel Job) key and [OK] on the control panel while the job you
want to cancel is being processed displays <03 CANCELING JOB> starts the
cancel job process. Start the key operation from Step 1.
3
Determine the selected item. Press [OK].
A soft reset is performed.
Operation Procedure Key Operation
1
Cancel the job while the job is being
processed.
Press the (Cancel Job) key.
CANCEL?
To Next Page
Loading...
