2-39
Installing the Printer
2
Turning the Printer ON and Checking the Printer Operation
4
Select the display language using [ ] and [ ], then press
[OK].
The display language is changed.
Turning the Printer OFF
Turn the printer OFF using the following procedure.
IMPORTANT
•
If the printer is connected to a network, make sure that other computers are not sending
print data to the printer before turning the printer OFF.
•
If you turn the printer OFF when the (Job) indicator is on, all the print data remaining
in the printer memory will be erased. If there is any necessary print data remaining in the
printer, wait until it is output, or press the (Reset) key in the offline state and then
select FORM FEED to output the data before turning the printer OFF.
•
Do not turn the power OFF when the printer is in any of the following status:
- During printing
-While the printer is running a self-diagnostic test immediately after turning the power
ON
-While a message informing you that the NVRAM is being initialized or being written is
displayed
-While the message <02 WARMING UP> is displayed
FRENCH
→
=FRENCH
→
PANNEAU LANGUES
→
To Next Page
Loading...
Need help?
General