7-18
Adjusting the Print Density
Routine Maintenance
7
Adjusting the Print Density
Adjust the print density using the following procedure when the printout result is too
dense or too light in color. The toner density is set to the standard density (4) before
shipment. You can adjust the toner density between 1 and 16.
1
Press the (Settings) key.
2
Select QUALITY MENU using [ ] and [ ], then press [OK].
The item for QUALITY MENU is displayed.
3
Select DENSITY using [ ] and [ ], then press [OK].
The setting value for DENSITY is displayed.
4
Specify the target numeric value using [ ] and [ ], then
press [OK].
Pressing [ ] decreases the value, and the print density becomes lighter.
Pressing [ ] increases the value, and the print density becomes denser.
"=" is displayed on the left of the value, and the density is specified.
SETUP
CONTROL MENU
→
QUALITY MENU
→
IMGE REFINEMENT
→
DENSITY
→
=4
→
6
→
=6
→
To Next Page
Loading...
Need help?
General