4-30
Paper Loading and Output Tray
Loading Paper in the Paper Cassette
4
5
Set the paper cassette in the printer.
Push the paper cassette into the printer firmly until the front side of the paper
cassette is flush with the front surface of the printer.
CAUTION
When setting the paper cassette, be careful not to catch your fingers.
This printer's paper cassette cannot automatically detect the paper size. Therefore, you
need to register the size of the paper loaded in the paper cassette.
See "Specifying the Size of the Paper in the Paper Cassette" (p. 4-30) to register the
paper size.
Specifying the Size of the Paper in the Paper Cassette
This printer's paper cassette cannot automatically detect the paper size. Therefore,
when you loaded paper in the paper cassette, you need to specify the size of the
paper loaded in the paper cassette using the control panel. When using standard
size paper, specify its size. When loading custom size paper, specify CUSTOM
SIZE or CUSTOM SIZE R. The paper size setting for the paper cassette is set to
"A4" by default.
Specify the paper size setting for the paper cassette using the following procedure.
IMPORTANT
•
Match the paper size specified in the SETUP menu of the printer and that specified in the
printer dr
iv
er
.
If they do not match, the message <PC LO
AD "size"> appears
.
In this
case, the setting values for CASSETTE1 SIZE and CASSETTE2 SIZE are changed to
those in the printer driver by pressing the (Online) key, allowing you to continue
printing.
To Next Page
Loading...
Need help?
General