Specifications
10-34
Appendix
10
Software Specifications
Command language PCL5e, PCL6, UFR II
Built-in fonts PCL: 45 Scalable fonts, 10 Bitmap fonts
Printable area
PCL5e, PCL6
The printable areas are as follows.
UFR II
Data cannot be printed within 5 mm margins on all sides of the
paper. (For envelopes, 10 mm margin on all sides)
* If you have selected the [Print with Upper Left of Sheet as
Starting Point] check box in the [Finishing Details] dialog box
in UFR II Printer Driver, you can extend the printable area to
near the edges of the paper. However, the data may be printed
with the edges missing when a document with no margins is
printed, even if the [Print with Upper Left of Sheet as Starting
Point] check box is selected. In this case, specify the scaling
factor in UFR II Printer Driver to print smaller so that any data
on the document will not miss, and then print again.
C
D
BA
Paper Size
A4
B5
A5
Legal
Letter
Executive
Statement
16K
Custom Size
Index Card
Envelope
A: Left Edge
6.1
6.1
6.1
6.4
6.4
6.4
6.4
6.4
6.4
10.0
10.0
B: Right Edge
6.1
6.1
6.1
6.4
6.4
6.4
6.4
6.4
6.4
10.0
10.0
C: Top Edge
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
10.0
10.0
D: Bottom Edge
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
10.0
10.0
(Unit: mm)