3-8
Direct Print
Using the Printer
3
Direct Print
Direct Print
The direct print function is a function that transmits a file from the host terminal to
the printer without the printer driver and allows the printer to detect the file and
print. Therefore, you do not need to open a file to print.
To perform printing, from the Remote UI, specify the image file in TIFF/JPEG format
that you want to print.
This printer also supports direct printing by command entry from Command Prompt
(the LPR command).
■ Printing from the Remote UI (See p. 3-9)
■ Printing from Command Prompt (See p. 3-14)
IMPORTANT
Note the following when printing image files using the direct print function.
- JPEG data is in compliance with the specifications of ITU-T recommendation T.81. TIFF
data is in compliance with the specifications of Adobe TIFF Revision6.0.
- The supporting status of encoding methods for JPEG data is as follows.
- Supported encoding method
DCT baseline
- Unsupported encoding methods
DCT extension
Reversible compression
Hierarchical
- The supporting status of encoding methods for TIFF data is as follows.
- Supported encoding methods
Uncompressed
ITU-T recommendation T.4 One-dimensional coding
ITU-T recommendation T.4 Two-dimensional coding
ITU-T recommendation T.6 Basic facsimile coding
ITU-T recommendation T.81 JPEG (Basic DCT only)
PackBits (Apple Macintosh PackBits)
- Unsupported encoding methods
LZW
ITU-T recommendation T.82 JBIG
ITU-T recommendation T.43 JBIG
ITU-T recommendation T.44 MRC
To Next Page
Loading...
