6-11
SETUP Menu Settings
6
Printing Environment Settings
SETUP Menu Settings
CONTROL MENU Options
POWER SAVE MODE
PANEL OFF*, DEEP SLEEP, OFF
Specifies whether the printer should use Power Save Mode.
There are two types of Power Save Mode, and the type of the mode the printer
enters depends on the setting for this item.
*Even if PANEL OFF or OFF is specified for this item, the printer enters Power Save Mode 2 (the Deep
Sleep mode) when [Deep Sleep] is executed in the Remote UI ([Device Manager] ➞ [Status] ➞
[Device Control] ➞ [Deep Sleep]).
Power Save Mode consumes less power during the sleep state. While the printer
is in Power Save Mode, the display on the control panel is off, and the following
indicators are on.
NOTE
•
For details on Power Save Mode, see "Power Saving (Power Save Mode)," on p.
3-2.
•
You can specify whether the printer should enter Power Save Mode when an error
is occurring in the printer (when the (Message) indicator is on, or the number in
the message blinks). (See PWR SAVE IN ERR: the next item)
Setting Value Power Save Mode the Printer Can Enter
PANEL OFF Power Save Mode 1 (the Panel Off mode) *
DEEP SLEEP
Power Save Mode 1 (the Panel Off mode)
Power Save Mode 2 (the Deep Sleep mode)
OFF The printer does not enter Power Save Mode. *
Power Save Mode Type Indicator that Comes On
Power Save Mode 1
(the Panel Off mode)
When the printer is online:
(Ready) indicator, Power indicator
When the printer is offline:
(Message) indicator, Power indicator
Power Save Mode 2
(the Deep Sleep mode)
Power Indicator
To Next Page
Loading...
Need help?
General