6-13
Printing Environment Settings
6
SETUP Menu Settings
PANEL LANGUAGE
ENGLISH*, FRENCH, GERMAN, ITALIAN, SPANISH
Confirm the language that is displayed in the display.
SHOW WARNINGS
CASSETTE EMPTY .............ON*, OFF
A Warning status is a status in which the printer requires some remedy although
the job is not affected. When the printer is in this status, an indicator blinks.
This item allows you to specify whether an indicator should blink when the printer
is in the following Warning status.
NOTE
The printer prints when either ON or OFF is specified.
PDL SELECT(PnP)
UFR II, PCL5E, PCL6
●If you want to connect the printer and computer with a USB cable
The printer driver for this printer may be installed automatically when the USB
cable is connected.
You can select the type of the printer driver ("UFR II", "PCL5e", or "PCL6") to be
installed in this item at the time.
●If you want to connect the printer and computer with a LAN cable
If you are using Windows Vista, you can detect the printer automatically using the
WSD (Web Service on Devices) protocol.
You can select the type of the printer driver ("UFR II", "PCL5e", or "PCL6") to be
installed on the automatically detected printer in this item.
IMPORTANT
•
When installing the printer driver manually, be sure to match the setting of this item
and the type of the printer driver to be installed. You cannot use printer drivers of a
different type.
•
After changing the settings for this item, cycle the power of the printer or perform a
hard reset to make the settings effective.
Setting Status Indicator Blink
CASSETTE
EMPTY
When the paper cassette
has run out of paper
The (Paper Source) indicator for
the paper source that has run out of
paper blinks.
To Next Page
Loading...
