5-2
Menu Functions
The Printing Environment
5
Menu Functions
This section describes the menu functions and their categories.
Menu Functions
Before printing, specify the total print pages, paper size, etc. Generally, these
settings are specified in an application or printer driver.
This printer, however, is supplied with many items as well as the settings for the
total print pages and paper size, enabling printing for a wide array of uses. Some
settings for this printer cannot be specified by application or printer driver. You can
specify these settings using the "menu functions".
You can specify the settings using the menu functions easily because in the menu
functions a variety of settings are classified by purpose.
There are the following two kinds of procedures for specifying the menu functions.
■ Settings Using the Printer's Control Panel
Specify the settings by pressing the keys while checking the display on the printer.
■ Settings Using the Remote UI
Some settings specified by the control panel can be specified by a web browser from your
computer.
NOTE
•
For this section, this manual describes only the procedures for specifying the menu
functions using the control panel. For details on specifying the settings using the Remote
UI, see "Remote UI Guide".
•
The settings for the menu functions are registered to the memory (NVRAM) in which data
is not deleted normally even if the printer is turned OFF. Therefore, even after cycling the
power of the printer, it starts with its settings unchanged from when the printer was
turned OFF last time.
To Next Page
Loading...
Need help?
General