Digi XBee® 3 Cellular LTE Cat 1 AT&T Smart Modem
User Guide
The XBee Smart Modem is an embedded Long-Term Evolution (LTE) Category 1 cellular module that
provides original equipment manufacturers (OEMs) with a simple way to integrate cellular
connectivity into their devices.
The XBee Smart Modem enables OEMs to quickly integrate cutting edge 4G cellular technology into
their devices and applications without dealing with the painful, time-consuming, and expensive FCC
and carrier end-device certifications.
With the full suite of standard XBee API frames and AT commands, existing XBee customers can
seamlessly transition to this new device with only minor software adjustments. When OEMs add the
XBee Smart Modem to their product, they create a future-proof design with flexibility to switch
between wireless protocols or frequencies as needed.
You can read some frequently asked questions here.
Applicable firmware and hardware
This manual supports the following firmware:
n 310xx and above
Note This manual uses the placeholder value "xx" in the firmware versions listed above, as the
manual documents the released features as of the time of its writing. Digi International periodically
releases new firmware containing bug fixes and new features. As new firmware is released and
distributor stock is refreshed, the new firmware will gradually become available without the need to
update. However, no guarantees can be made that a specific version of the firmware will be populated
on any given XBee as delivered. If a specific revision is desired, it is the user's responsibility to ensure
that version is loaded onto all XBees purchased.
Note You must upgrade your device to the latest firmware for all features to be available. See Update
the firmware.
It supports the following hardware:
n XB3-C-A1-UT-xxx
SIM cards
The XBee Smart Modem requires a 4FF (Nano) size SIM card. The SIM interface supports both 1.8 V
and 3 V SIM types.
Digi XBee® 3 Cellular LTE Cat 1 AT&T Smart Modem User Guide
15
To Next Page
Loading...
Need help?
General
