Digi XBee 3 User Manual

AT commands Network commands
Digi XBee® 3 Cellular LTE Cat 1 AT&T Smart Modem User Guide
194
Format
server_cert;client_cert;client_key
Parameter range
From 1 through 127 ASCII characters.
Default
N/A
$1 (TLS Profile 1)
Specifies the TLS certificate(s) to use for Tx Request with TLS Profile - 0x23 transmissions with profile
set to 1.
Format
server_cert;client_cert;client_key
Parameter range
From 1 through 127 ASCII characters.
Default
N/A
$2 (TLS Profile 2)
Specifies the TLS certificate(s) to use for Tx Request with TLS Profile - 0x23 transmissions with profile
set to 2.
Format
server_cert;client_cert;client_key
Parameter range
From 1 through 127 ASCII characters.
Default
N/A
TM (IP Client Connection Timeout)
The IP client connection timeout. If there is no activity for this timeout then the connection is closed. If
TMis 0, the connection is closed immediately after the device sends data.
If you change the TM value while in Transparent Mode, the current connection is immediately closed.
Upon the next transmission, the TM value applies to the newly created socket.
If you change the TM value while in API Mode, the value only applies to subsequently opened sockets.
TM does not apply to explicit sockets.
Parameter range
0 - 0xFFFF [x 100 ms]

Digi XBee 3 Specifications

General

Brand	Digi
Model	XBee 3
Category	Modem
Language	English