Digi XBee 3 User Manual

AT commands Remote Manager commands
Digi XBee® 3 Cellular LTE Cat 1 AT&T Smart Modem User Guide
234
Note Changing this value causes any currently active Remote Manager connections to be closed and
recreated.
Parameter range
10 - 7200 (x 1 s)
Default
75
K2 (Remote Manager Device Send Keepalive)
Specify the Remote Manager Device Send Transmit Keepalive Interval value in seconds. The Remote
Manager considers a connection to have failed after 3 missed keepalives.
This command works with the K1 command to limit data usage. See Configure Remote Manager
keepalive interval.
Note Changing this value causes any currently active Remote Manager connections to be closed and
recreated.
Parameter range
10 - 7200 (x 1 s)
Default
60
$D (Remote Manager certificate)
Defines the TLS Remote Manager certificate.
Parameter range
N/A
Default
/flash/cert/digi-remote-mgr.pem
HF (Health Metrics Reporting Frequency)
Reports the time between attempts to upload metrics. The time is measured in minutes. Metrics
which cannot be collected or reported at any particular time are skipped until the next attempt.
Parameter range
1 to 0xFFFF
Value Description
0x3c
One hour.
Default
0x3c

Digi XBee 3 Specifications

General

Brand	Digi
Model	XBee 3
Category	Modem
Language	English