Digi XBee 3 User Manual

Regulatory information FCC-approved antennas
Digi XBee® 3 Cellular LTE Cat 1 AT&T Smart Modem User Guide
291
Part number Type (description) Gain Application
31000020-01 Integral antenna -2.5 dBi Fixed/Mobile
A24-HASM-450 Dipole (Half-wave articulated RPSMA-4.5") 2.1 dBi Fixed/Mobile
A24-HABUF-P5I Dipole (Half-wave bulkhead mount U.FL w/ 5" pigtail) 2.0 dBi Fixed/Mobile
A24-HASM-525 Dipole (Half-wave articulated RPSMA-5.25") 2.0 dBi Fixed/Mobile
FXP74.07.0100A Flexible PCB, U.FL w/ 100mm pigtail 4.0 dBi Fixed/Mobile
Cellular antennas
Antenna gain must be below:
Frequency band Gain
Band 2 (1900 MHz) 9.70 dBi
Band 4 (1700 MHz) 6.0 dBi
Band 12 (700 MHz) 9.01 dBi
Bande de fréquence Gain
Band 2 (1900 MHz) 9.70 dBi
Band 4 (1700 MHz) 6.0 dBi
Band 12 (700 MHz) 9.01 dBi
FCC publication 996369 related information
In publication 996369 section D03, the FCC requires information concerning a module to be presented
by OEM manufacturers. This section assists in answering or fulfilling these requirements.
2.1 General
No requirements are associated with this section.
2.2 List of applicable FCC rules
This module conforms to FCC Parts 27(cellular).
2.3 Summarize the specific operational use conditions
Certain approved antennas require attenuation for operation. For the XBee Smart Modem, see
Cellular antennas.
Host product user guides should include the antenna table if end customers are permitted to select
antennas.
2.4 Limited module procedures
Not applicable.

Digi XBee 3 Specifications

General

Brand	Digi
Model	XBee 3
Category	Modem
Language	English