XBee connection examples
The following examples provide some additional scenarios you can try to get familiar with the XBee.
These examples are focused on inter-operating with a host processor to drive the XBee.
If you are interested in using the intelligence built into the XBee, see Get started with MicroPython.
Note Some carriers restrict your internet access. If access is restricted, running some of these
examples may not be possible. Check with your carrier provider to determine whether internet access
is restricted.
Connect to the Echo server 23
Connect to the ELIZA server 25
Connect to the Daytime server 27
Send an SMS message to a phone 29
Perform a (GET) HTTP request 31
Connect to a TCP/IP address 33
Software libraries 33
Digi XBee® 3 Cellular LTE Cat 1 AT&T Smart Modem User Guide
22