Digi XBee 3 User Manual

Digi XBee® 3 Cellular LTE Cat 1 AT&T Smart Modem User Guide
5
Example: debug the secondary UART 43
Exit MicroPython mode 43
Other terminal programs 44
Tera Term for Windows 44
Use picocom in Linux 45
Get started with BLE
On XBee 3 Cellular firmware ending in x15 or newer 47
On XBee 3 Cellular firmware ending in x14 or older 47
Enable BLE on an XBee device 48
Enable BLEand configure the BLEpassword using XCTU 48
Get the Digi XBeeMobile phone application 49
Connect with BLEand configure your XBee device 49
BLE reference 50
BLE advertising behavior and services 50
Device Information Service 50
XBee API BLEService 50
API Request characteristic 51
API Response characteristic 51
Get started with Digi Remote Manager
Create a Remote Manager account and add devices 52
Create a Remote Manager account 53
Add an XBee Smart Modem to Remote Manager 53
Verify the connection between a device and Remote Manager 54
Configure Remote Manager features by scheduling tasks 54
Overview: Create a schedule for a set of tasks 54
Examples 55
Example: Read settings and state using Remote Manager 55
Example: Configure a device from Remote Manager using XML 56
Example: Schedule a task to update the device firmware using Remote Manager 57
Example: Update MicroPython from Remote Manager using XML 58
Manage data in Remote Manager 62
Review device status information from Remote Manager 62
Manage secure files in Remote Manager 63
Remote Manager reference 64
Enable SM/UDP 64
TCP connection 64
Disconnect 66
Configure XBee settings within Remote Manager 66
Examples: IOT protocols with transparent mode
Get started with CoAP 70
CoAP terms 70
CoAP quick start example 70
Configure the device 71
Example: manually perform a CoAPrequest 71
Example: use Python to generate a CoAP message 72
Get started with MQTT 74
Example: MQTT connect 74

Digi XBee 3 Specifications

General

Brand	Digi
Model	XBee 3
Category	Modem
Language	English