Operation name Conditions
Add SPM groups and WWNs
Delete SPM groups
Set priority of SPM groups
(attribute/upper limit)
Rename SPM groups
Add WWNs
Delete WWNs
Initialization All ports must be assigned to the Storage
Administr
ator group permitted to manage them.
Set threshold
Creating configuration files
Authentication servers and authorization servers must be conî ´gured using conî ´guration
î ´les.
Conî ´guration
î ´les can be created for LDAP, RADIUS, and Kerberos authentication
protocols.
Creating an LDAP configuration file
You can use an LDAP server for authentication on your storage system.
To use an LDAP server for authentication, create a conî ´guration î ´le in UTF-8 encoding.
Include information about the authentication server as shown in the following example.
Any î ´le name and extension is allowed.
Caution: If you save the conî ´guration î ´le when using the Windows standard
Notepad application, specify ANSI for the letter code. If you use an editor
other than the memo pad and have the YTF-8 BOM setting, specify No BOM
then save.
auth.server.type=ldap
a
uth.server.name=<server_name>
auth.group.mapping=<value>
auth.ldap.<server_name>.<attribute>=<value>
A full example is shown here:
auth.server.type=ldap
a
uth.server.name=PrimaryServer
auth.group.mapping=true
auth.ldap.PrimaryServer.protocol=ldaps
auth.ldap.PrimaryServer.host=ldaphost.domain.local
auth.ldap.PrimaryServer.port=636
Creating conî ´guration î ´les
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 116
To Next Page
Loading...
Need help?
General
