Hitachi VSP Gx00 series User Manual

Item Content
ECC Group Number of the parity group where the LDEV belongs.
■
If the number starts with "E" (for e
xample, E1-1), the parity group
contains external volumes.
■
If the type of the LDEV is a Dynamic Provisioning or Thin Image virtual
volume, a hyphen is output.
Refer to "LdevInfo.csv" for information about the LDEV type.
LPartition.csv
This CSV le contains information about the cache logical partitioning function. A record
is cr
eated for each cache partition for a managed resource.
For details of the cache logical partitioning function, see the Performance Guide.
Table 40 LPartition.csv le (Title: <<Logical Partitioning>>)
Item Content
CLPR# CLPR ID (in decimal)
CLPR Name CLPR name
Cache Size(MB) Cache size allocated to this CLPR (in MB)
ECC Group Number of parity group allocated to this CLPR.
■
If the number starts with "E" (for e
xample, E1-1), the parity group
contains external volumes.
■
If the type of the LDEV is a Dynamic Provisioning or Thin Image virtual
volume, a hyphen is output.
Refer to "LdevInfo.csv" for information about the LDEV type.
LDEV#(V-VOL) LDEV number allocated to this CLPR.
■
VSP G200: (00:00:00 to 00:07:)
■
VSP G400, G600
or VSP F400, F600: (00:00:00 to 00:0f:)
■
VSP G800 or VSP F800: (00:00:00 to 00:3f:)
The type of this LDEV is Dynamic Provisioning, Thin Image, or ALU.
LunInfo.csv
This CSV
le contains information about LU path denitions. A record is created for each
host group. For more information about LU path denitions, see the Provisioning Guide.
LPartition.csv
Appendix A: Examples of storage conguration reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 268

Hitachi VSP Gx00 series Specifications

General

Brand	Hitachi
Model	VSP Gx00 series
Category	Storage
Language	English