Hitachi VSP Gx00 series User Manual

Chapter 3: Configuring the storage system
When conguring the storage system, you must set storage system information, set up
security
, and register the SVP.
This chapter provides information about conguring the storage system.
System administration tasks at a glance
The following table summarizes key system administration tasks. The tool used to
perform these tasks depends on whether the storage system contains NAS modules.
Table 2 System administration tasks at a glance
Task
Block-only storage
systems (no NAS
modules installed)
Block and file storage systems
(NAS modules installed)
Set IPv4 and IPv6
network settings and
set HT
TP blocking
Maintenance utility
See
Changing network
communication
settings (on page 49)
IP addresses cannot be added,
deleted, or
modied in the NAS
Manager. To change these
addresses, use the maintenance
utility.
Set system clock (date
and time)
Maintenance utility
See
Changing the date
and time (on
page 48)
NAS Manager
See Changing the system date and
time of the NAS Modules (on
page 55)
Congure audit log
settings
Maintenance utility
See Audit log settings
(on page 199)
NAS Manager
See the File Services Administr
ation
Guide (MK-92HNAS006) and the
Server and Cluster Administration
Guide (MK-92HNAS010)
Congure alert
notications
Maintenance utility
See
Alert notications
(on page 177)
NAS Manager
See the Server and Cluster
Administr
ation Guide
(MK-92HNAS010)
Changing link
aggregation
N/A NAS Manager
See the Network Administration
Guide (MK-92HNAS008)
Chapter 3:
Conguring the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 45

Hitachi VSP Gx00 series Specifications

General

Brand	Hitachi
Model	VSP Gx00 series
Category	Storage
Language	English